Texas Instruments BQ51010B

Description

The bq51010B is a family of advanced, flexible, secondary-side devices for wireless power transfer in portable applications. The bq51010B devices provide the AC/DC power conversion and regulation while integrating the digital control required to comply with the Qi v1.1 communication protocol. Together with the bq50xxx primary-side controller, the bq51010B enables a complete contact-less power transfer system for a wireless power supply solution. Global feedback is established from the secondary to the primary in order to control the power transfer process utilizing the Qi v1.1 protocol.

The bq51010B devices integrate a low resistance synchronous rectifier, low-dropout regulator, digital control, and accurate voltage and current loops to ensure high efficiency and low power dissipation.

The bq51010B also includes a digital controller that can calculate the amount of power received by the mobile device within the limits set by the WPC v1.1 standard. The controller will then communicate this information to the transmitter in order to allow the transmitter to determine if a foreign object is present within the magnetic interface and introduces a higher level of safety within magnetic field. This Foreign Object Detection (FOD) method is part of the new requirements under the WPC v1.1 specification.

Features

• Integrated Wireless Power Supply Receiver Solutionwith a 7V Regulated Supply93% Overall Peak AC-DCEfficiencyFull Synchronous RectifierWPC v1.1 Compliant Communication ControlOutput Voltage ConditioningOnly IC Required Between RX coil and 7V Output
• WPC v1.1 Compliant (FOD Enabled) Highly Accurate CurrentSense
• Dynamic Rectifier Control for ImprovedLoad Transient Response
• Dynamic Efficiency Scaling for OptimizedPerformance Over wide Range of Output Power
• Adaptive Communication Limit for RobustCommunication
• Supports 20-V Maximum Input
• Low-power Dissipative Rectifier Overvoltage Clamp(VOVP = 15V)
• Thermal ShutdownMultifunction NTC and Control Pin for Temperature
• Monitoring, Charge Complete and Fault Host Control1.9 × 3mm DSBGA

Typical applications

• Digital Cameras
• WPC Compliant Receivers
• Hand-held Devices
• Portable Media Players
• HeadsetS
• Cell Phones, Smart Phones

More information

• Datasheet
• IC product information