IC manufacturers Onsemi

IC manufacturers (96)

Onsemi NCV7342D13R2G | Demoboard CAN-GEVB

High Speed Low Power CAN Transceiver

Overview

TopologyOther Topology

Description

The NCV7342 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. The NCV7342 is an addition to the CAN high-speed transceiver family complementing NCV734x stand-alone CAN transceivers and previous generations such as AMIS42665, AMIS3066x, etc. Due to the wide common-mode voltage range of the receiver inputs and other design features, the NCV7342 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremly low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.

Features

Compatible with the ISO 11898-2, ISO 11898-5 Standards

  • High Speed (up to 1 Mbps)

  • VIO Pin on NCV7342-3 Version Allowing Direct Interfacing with 3 V to 5 V Microcontrollers

  • VSPLIT Pin on NCV7342-0 Version for Bus Common Mode Stabilization

  • Very Low Current Consumption in Standby Mode with Wake-up via the Bus

  • Excellent EMS Level Over Full Frequency Range. Very Low EME. Low EME also without CM Choke.

  • Bus Pins Protected Against >15 kV System ESD Pulses

  • Transmit Data (TxD) Dominant Time-out Function

  • Bus Dominant Time-out function in Standby Mode

  • Under All Supply Condition the Chip Behaves Predictably

  • No Disturbance of the Bus Lines with an Unpowered Node

  • Thermal Protection

  • Bus Pins Protected Against Transients in an Automotive Environment

  • Bus Pins Short Circuit Proof to Supply Voltage and Ground

  • AEC-Q100 Qualified

Typical applications

  • Industrial Networks
  • Automotive

More information

Products

Order Code Data­sheet Simu­lation Downloads Product seriesCTol. CVR
(V (DC))
SizeDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
H
(mm)
Operation Force (Value)
(g)
Electrical Life
(Cycles)
Actuator ColorVaporphase processPinsRowsGenderTypeIR
(A)
PackagingColorApplicationPCB/Cable/PanelModularityWire SectionMountOperating TemperatureWorking Voltage
(V (AC))
Samples
885012206046SPEC
8 files WCAP-CSGP MLCCs 16 V(DC)100 nF ±10% 16 0603 3.55 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel -55 °C up to +125 °C
885012107014SPEC
8 files WCAP-CSGP MLCCs 16 V(DC)10 µF ±20% 16 0805 100.01 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel -55 °C up to +85 °C
618009231221SPEC
6 files WR-DSUB 8.08 mm Male Angled PCB Connector w. Hex Screw5000 MΩ 30.8 9 Male Angled 3 Tray Black PCB -55 °C up to +105 °C 125
691322310002SPEC
6 files WR-TBL Series 322 - 3.81 mm Horizontal PCB Header 8.81 2 Horizontal 10.5 Box Green Pluggable PCB No THT -40 °C up to +105 °C 300
691361300002SPEC
3 files WR-TBL Series 361 - 3.81 mm Vertical 7.62 2 Vertical 10.5 Box Green Pluggable Cable No 16 to 26 (AWG) 1.31 to 0.129 (mm²) Cable -40 °C up to +105 °C 300
430182043816SPEC
5 files WS-TASV SMT Tact Switch 6x6 mm 12100 MΩ 4.3 160 1000000 Black not specified 0.05 Tape and Reel -40 °C up to +85 °C
60900213421SPEC
3 files WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point1000 MΩ 2.44 1 Jumper 3 Bag Black -40 °C up to +125 °C 250
61300211121SPEC
6 files WR-PHD 2.54 mm THT Pin Header1000 MΩ 5.08 2 Single Pin Header Straight 3 Bag THT -40 °C up to +105 °C 250
61300311121SPEC
6 files WR-PHD 2.54 mm THT Pin Header1000 MΩ 7.62 3 Single Pin Header Straight 3 Bag THT -40 °C up to +105 °C 250
Samples
Order Code Data­sheet Simu­lation Downloads Product seriesCTol. CVR
(V (DC))
SizeDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
H
(mm)
Operation Force (Value)
(g)
Electrical Life
(Cycles)
Actuator ColorVaporphase processPinsRowsGenderTypeIR
(A)
PackagingColorApplicationPCB/Cable/PanelModularityWire SectionMountOperating TemperatureWorking Voltage
(V (AC))
Samples