IC-Hersteller STMicroelectronics

IC-Hersteller (95)

STMicroelectronics VIPER38LE

Peak power high-voltage converter - VIPer Plus

Details

TopologieSperrwandler
Eingangsspannung90-265 V
Schaltfrequenz54-66 kHz
Ausgang 112 V / 1.25 A
IC-Revision2

Beschreibung

The device is a high-voltage converter that smartly integrates an 800 V rugged power MOSFET with PWM current-mode control. This IC is capable of meeting more stringent energy-saving standards as it has very low consumption and operates in burst mode under light load.

The device features an adjustable extra power timer (EPT) that enables the IC to sustain overload conditions for a few seconds.

The integrated HV startup, sense FET and oscillator with jitter allow the advantage of using minimal components in the application.

The device features high-level protections like dual-level OCP, output overvoltage, short-circuit, and thermal shutdown with hysteresis. After the removal of a fault condition, the IC is automatically restarted.

Eigenschaften

  • 800 V avalanche-rugged power MOSFET with
  • embedded HV startup and sense FET
  • PWM current-mode controller
  • OCP with selectable threshold (IDlim) and 2nd
  • OCP with higher value (IDMAX) to protect the IC
  • from transformer saturation or short-circuit of the secondary diode
  • 30 mW no-load consumption at 230 Vac
  • Two operating frequencies:
  • 60 kHz or 115 kHz
  • Jittered frequency reduces the EMC
  • Extra power timer (EPT) blanks the overload current for few seconds
  • Output overvoltage protection with tight tolerance and digital noise filter
  • Soft-start reduces the stress during startup and increases IC lifetime
  • Automatic restart after a fault condition
  • Thermal shutdown increases system reliability and IC lifetime

Typische Anwendungen

  • Adapters
  • Power supply for energy meters and data
  • Auxiliary power supply for consumer and home

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieIR
(A)
L
(mH)
RDC max.
(mΩ)
VR
(V (AC))
VT
(V (AC))
MaterialL
(mm)
W
(mm)
H
(mm)
Montageart Muster
744821120SPEC
10 Dateien WE-CMB Stromkompensierte Netzdrossel 0.5 20 1000 250 1500 MnZn 15 7.8 17.5 THT
Artikel Nr. Daten­blatt Simu­lation
744821120SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieIR
(A)
L
(mH)
RDC max.
(mΩ)
VR
(V (AC))
VT
(V (AC))
MaterialL
(mm)
W
(mm)
H
(mm)
Montageart Muster