IC-Hersteller Qorvo

IC-Hersteller (96)

Qorvo ACT88325 | Demoboard ACT88325EVK1-101 User’s Guide

Advanced PMU with 3 Bucks, 2 LDOs and Load Bypass Switch

Details

TopologieAbwärtswandler
Eingangsspannung2.7-5.5 V
Schaltfrequenz1.12-2.25 kHz
Ausgang 13.3 V / 4 A
Ausgang 21.8 V / 2 A
Ausgang 30.9 V / 3 A
IC-Revision1.0

Beschreibung

This document describes the characteristic and operation of the Active Semi ACT88325EVK1-101 evaluation kit (EVK).It provides setup and operation instructions, schematic, layout, BOM, and test data. This EVK demonstrates the ACT88325VA101ActivePMU power management IC. Other ACT88325VAxxx options can beevaluated on this EVK by replacing the IC and any other necessary components.The EVK can be used as a standalone board if desired. However, to access the internal registers and to take full advantage of the IC’s capability, the user must connect the EVK kit to a PC with Active Semi’s USB-TO-I2C interface dongle and use the GUI software. The EVK provides full access to the each converter’s input and output voltage, as well as all the digital control signals. This gives the user the flexibility to configure the EVK to match their real world system.Note that the ACT88325EVK1-101 is specifically configured for the ACT88325VA101. This CMI option is configured to power the Silicon Motion 2263 and SM2263XT processors with a 3.3V input.

Eigenschaften

  • Wide input voltage range
    • Vin = 2.7V to 5.5V
  • Complete integrated power solution
    • One 4A DC/DC Step-Down with BypassMode
    • Two 3A DC/DC Step-Down Regulators
    • Two 300mA LDOs
    • High Power Load Switch Gate Driver withSlew Rate Control Space Savings
    • Fully integrated
    • High Fsw = 2.25MHz or 1.125MHz
    • Integrated sequencing
  • Easy system level design
    • Configurable sequencing
    • Seamless sequencing with external supplies
    • Programmable Reset and Power GoodGPIO’s
  • Buck 1 Bypass Mode for 3.3V system levelcompliance
  • Highly configurable
    • μP interface for status reporting and controllability
    • Flexible Sequencing Options
    • I2C Interface – 1MHz
    • Multiple Sleep Modes
    • See ACT88326 for Pushbutton Startup

Typische Anwendungen

  • Microcontroller Applications / FPGA
  • Solid-State Drives
  • Personal Navigation Devices

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionL
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
fres
(MHz)
V
(V)
MontageartPinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
691214110002SPEC
6 Dateien WR-TBL Series 2141 - 3.50 mm Horiz. Entry Modular Rising Cage Clamp PCB Ja 24 to 16 (AWG) 0.2 to 1 (mm²) THT 2 Horizontal 10 Karton
74438323010SPEC
9 Dateien WE-MAPI SMT-Speicherdrossel 1 3.55 5.3 63 80 80 SMT 2 1 2.5
74438356010SPEC
9 Dateien WE-MAPI SMT-Speicherdrossel 1 10.1 11.5 12 55 80 SMT 2 2 7.2
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 3 Single Pin Header Gerade 3 Beutel
61300411121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 4 Single Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionL
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
fres
(MHz)
V
(V)
MontageartPinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster