IC-Hersteller Onsemi

IC-Hersteller (96)

Onsemi LC717A00AR | Demoboard TS-GEVB

Capacitance-Digital-Converter for Electrostatic Capacitive Touch Sensors

Details

TopologieSonstige Topologie

Beschreibung

The LC717A00AR is a high-performance, low-cost capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 8 channels capacitance-sensor input. The built-in logic circuit can detect the state (ON/OFF) of each input and output the result. This makes it ideal for various switch applications. The calibration function is automatically performed by the built-in logic circuit during power activation or whenever there are environmental changes. In addition, since initial settings of parameters, such as gain, are configured, LC717A00AR can operate as stand-alone when the recommended switch pattern is applied. Also, since LC717A00AR has a serial interface compatible with I2C and SPI bus, parameters can be adjusted using external devices whenever necessary. Moreover, outputs of the 8-input capacitance data can be detected and measured as 8-bit data.

Eigenschaften

Detection system: Differential capacitance detection (Mutual capacitance type)

  • High sensitivity performance - even wearing multiple layers of gloves, air gap, or thick materials
  • Input capacitance resolution: Can detect capacitance changes in the femto Farad order

    • Design friendly - can be connected directly to a familiar MCU and execute stand alone operation
  • Measurement interval (8 differential inputs):18ms (Typ) (at initial configuration),3ms (Typ) (at minimum interval configuration)

    • Automated built-in noise and environmental change compensation function technology
  • External components for measurement: Not required

  • Current consumption: 320 µA (Typ) (VDD = 2.8 V), 740 µA (Typ) (VDD = 5.5 V)

  • Supply voltage: 2.6 V to 5.5 V

  • Detection operations: Switch

  • Interface: I2C compatible bus or SPI selectable.

Typische Anwendungen

  • Black goods / PC peripherals / Office Automation
  • White goods

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
H
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessPinsReihenGenderTypIR
(A)
VerpackungFarbe Muster
150060VS75000SPEC
6 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 570 Hellgrün 572 40 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
150060RS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 625 Rot 630 250 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
885012206046SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)100 nF ±10% 16 0603 -55 °C up to +125 °C 3.55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206052SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)1 µF ±10% 16 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012107014SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)10 µF ±20% 16 0805 -55 °C up to +85 °C 100.01 GΩ X5R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
885012208041SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)10 µF ±10% 16 1206 -55 °C up to +125 °C 100.01 GΩ X7R Klasse II 3.2 1.6 0.5 1.6 7" Tape & Reel
61301221021SPEC
6 Dateien WR-PHD 2.54 mm THT Angled Dual Pin Header -40 °C up to +105 °C1000 MΩ 15.24 12 Dual Pin Header Angled 3 Beutel Schwarz
430182043816SPEC
5 Dateien WS-TASV SMT Tact Switch 6x6 mm 12 -40 °C up to +85 °C100 MΩ 4.3 160 1000000 Schwarz nicht spezifiziert 0.05 Tape and Reel
60900213421SPEC
3 Dateien WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point -40 °C up to +125 °C1000 MΩ 2.44 1 Jumper 3 Beutel Schwarz
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
H
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessPinsReihenGenderTypIR
(A)
VerpackungFarbe Muster