IC-Hersteller Infineon Technologies

IC-Hersteller (95)

Infineon Technologies IRSM505-065 | Demoboard EVAL-M1-05-65D

EVAL-M1-05-65D User Manual iMOTION™ Modular Application Design Kit

Details

TopologieSonstige Topologie
IC-Revision2.1

Beschreibung

The EVAL-M1-05-65D evaluation board is a part of the iMOTION™ Modular Application Design Kit for drives (iMOTION™ MADK). The MADK-platform is intended to use various power stages with different control boards. These boards can easily be interfaced through the 20 pin iMOTION™ MADK-M1 interface connector. This evaluation board is designed to give comprehensible solutions of a power stage featuring μIPM™ -DIP. The board is equipped with all assembly groups for sensor less field oriented control (FOC). It provides a singlephase AC-connector, rectifier, DC-link and 3-phase output for power. It contains emitter-shunts for current sensing and a voltage divider for DC-link voltage measurement. The EVAL-M1-05-65D evaluation board is available from Infineon. The features of this board are described in the design feature chapter of this document, whereas the remaining paragraphs provide information to enable the customers to copy, modify and qualify the design for production according to their own specific requirements. Environmental conditions were considered in the design of the EVAL-M1-05-65D. The design was tested as described in this document but not qualified regarding safety requirements or manufacturing and operation over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only. Evaluation boards are not subject to the same procedures as regular products regarding Returned Material Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are intended to be used under laboratory conditions by specialists only.

Eigenschaften

  • 3-phase inverter including high voltage gate drivers
  • Integrated bootstrap functionality
  • Trench FREDFET with RDS(on) of 1.3 Ω @ 25°C
  • Under voltage lockout for all channels
  • Matched propagation delay for all channels
  • Temperature feedback via NTC applicable for IRSM505-065
  • Optimized dV/dt for loss and EMI trade off
  • 3.3 V logic compatible and advanced input filter
  • Possibility to choose single shunt or leg shunt current sensing
  • Driver tolerant to negative transient voltage
  • Isolation 1900 Vrms, 1min
  • Certified by UL file number E252584

Typische Anwendungen

  • energy efficient fans and pumps
  • Housing Appliance

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CVR
(V (AC))
SicherheitsklassedV/dt
(V/µs)
DF @ 1 kHz
(%)
RISOBetriebstemperaturRaster
(mm)
L
(mm)
W
(mm)
Tol. CBauformBetriebstemperaturQ
(%)
DF
(%)
KeramiktypFl
(mm)
Endurance
(h)
IRIPPLE
(mA)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster
890324025017CSSPEC
8 Dateien WCAP-FTX2 Folienkondensatoren Across the mains100 nF 275 X2 300 0.130 GΩ -40 °C bis zu +105 °C 15 18 6 ±10% Pitch 15 mm -40 °C up to +105 °C 12 4 Karton
691216510003SSPEC
6 Dateien WR-TBL Serie 2165S - 5.08 mm Horizontal Entry Modular w. Rising Cage Clamp Rising Cage Clamp PCB Ja 12 to 30 (AWG) 3.31 to 0.0509 (mm²) -30 °C bis zu +120 °C 5.08 15.24 -30 °C up to +120 °C 3 Horizontal 24 Karton
691216910003SPEC
6 Dateien WR-TBL Serie 2169 - 7.50 mm Horizontal Entry Modular w. Rising Cage Clamp Rising Cage Clamp PCB Ja 12 to 30 (AWG) 3.31 to 0.0509 (mm²) -30 °C bis zu +120 °C 7.5 22.5 -30 °C up to +120 °C 3 Horizontal 24 Karton
151034RS03000SPEC
6 Dateien WL-TMRW THT Mono-color Round Waterclear 621 Rot 628 2600 2 AlInGaP 30 3 3 3 mm -40 °C up to +85 °C 5.3 Lose
860020574012SPEC
7 Dateien WCAP-ATG5 Aluminium-Elektrolytkondensatoren220 µF 35 -40 °C bis zu +105 °C 3.5 11.5 ±20% 12 2000 255 77 8 Ammopack
860021380020SPEC
7 Dateien WCAP-ATG5 Aluminium-Elektrolytkondensatoren100 µF 400 -25 °C bis zu +105 °C 7.5 31.5 ±20% 15 2000 520 1200 16 Ammopack
885012007063SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)1 nF 5010 GΩ 2 1.25 ±5% 0805 -55 °C up to +125 °C 1000 NP0 Klasse I 0.5 0.8 7" Tape & Reel
885012007065SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)2.2 nF 5010 GΩ 2 1.25 ±5% 0805 -55 °C up to +125 °C 1000 NP0 Klasse I 0.5 0.8 7" Tape & Reel
885012207078SPEC
7 Dateien WCAP-CSGP MLCCs 25 V(DC)1 µF 250.5 GΩ 2 1.25 ±10% 0805 -55 °C up to +125 °C 5 X7R Klasse II 0.5 1.25 7" Tape & Reel
885012207098SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF 505 GΩ 2 1.25 ±10% 0805 -55 °C up to +125 °C 2.5 X7R Klasse II 0.5 0.8 7" Tape & Reel
885012107004SPEC
8 Dateien WCAP-CSGP MLCCs 6.3 V(DC)10 µF 6.30.01 GΩ 2 1.25 ±20% 0805 -55 °C up to +85 °C 15 X5R Klasse II 0.5 1.25 7" Tape & Reel
613020243121SPEC
6 Dateien WR-PHD 2.54 mm Angled Dual Socket Header1000 MΩ 2.54 25.9 -40 °C up to +105 °C 20 Dual Socket Header Angled 3 Tray
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CVR
(V (AC))
SicherheitsklassedV/dt
(V/µs)
DF @ 1 kHz
(%)
RISOBetriebstemperaturRaster
(mm)
L
(mm)
W
(mm)
Tol. CBauformBetriebstemperaturQ
(%)
DF
(%)
KeramiktypFl
(mm)
Endurance
(h)
IRIPPLE
(mA)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster