IC-Hersteller Infineon Technologies

IC-Hersteller (95)

Infineon Technologies IMC102T-F064 | Demoboard EVAL-M3-102T

EVAL-M3-102T User Manual iMOTION™ Modular Application Design Kit

Details

TopologieSonstige Topologie
IC-Revision1.5

Beschreibung

The EVAL-M3-102T evaluation board is a part of the iMOTION™ Modular Application Design Kit for drives (iMOTION™ MADK). In order to run a motor, the mating power board is required to interface this evaluation board. The MADK platform is intended to use various power stages with different control boards. These boards can easily be interfaced through the 30-pin iMOTION™ MADK M3, or the 30-pin iMOTION™ MADK M3 interface connector. This board is equipped with 30-pin M3 connector and is intended for power factor correction and single motor control only. This evaluation board is designed to give comprehensible solutions of sensorless control of permanent magnet motors over the full speed range. It provides a capable of 3-phase and type 3 of 2-phase modulation, a micro- USB connector and on board debugger isolated by digital isolator, and UART interface. The EVAL-M3-102T evaluation board is available from Infineon. The features of this board are described in the main feature chapter of this document, whereas the remaining paragraphs provide information to enable the customers to copy, modify and qualify the design for production according to their own specific requirements.Environmental conditions were considered in the design of the EVAL-M3-102T, but it is not qualified regarding safety requirements or manufacturing and operation over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only. Evaluation boards are not subject to the same procedures as regular products regarding Returned Material Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are intended to be used under laboratory conditions by technical specialists only.

Eigenschaften

  • MCE (Motion Control Engine) as ready-to-use solution for variable speed drives
  • Field oriented control (FOC) for permanent magnet synchronous motor (PMSM)
  • Space vector PWM with sinusoidal commutation and integrated protection features
  • Current sensing via single or leg shunt
  • Sensorless operation
  • Active boost or totem pole PFC control integrated
  • Various serial communication interfaces (UART, I2C, SPI)
  • Multiple motor parameter support
  • 3.3V (default) or 5V VDD power supply
  • Flexible host interface options for speed commands: UART, I2C, SPI, PWM or analog signal
  • Support for IEC 60335 (‘Class B’)
  • Scalable package options

Typische Anwendungen

  • Pumps, fans
  • Refrigerators / Home appliances

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturQ
(%)
DF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
150060BS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 470 Blau 465 145 3.2 InGaN 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
150060GS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 525 Grün 515 430 3.2 InGaN 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
150060RS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 625 Rot 630 250 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
885012006003SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)15 pF ±5% 10 0603 -55 °C up to +125 °C 70010 GΩ NP0 Klasse I 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206004SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)220 pF ±10% 10 0603 -55 °C up to +125 °C 510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206010SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)2.2 nF ±10% 10 0603 -55 °C up to +125 °C 510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206012SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)4.7 nF ±10% 10 0603 -55 °C up to +125 °C 510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206014SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)10 nF ±10% 10 0603 -55 °C up to +125 °C 510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206020SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)100 nF ±10% 10 0603 -55 °C up to +125 °C 55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)1 µF ±10% 10 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
61300111121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 2.54 1 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Gerade 3 Beutel
61300421121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Gerade 3 Beutel
61300621121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 7.62 6 Dual Pin Header Gerade 3 Beutel
61300821121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 10.16 8 Dual Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturQ
(%)
DF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster