IC-Hersteller AnDAPT Inc

IC-Hersteller (95)

AnDAPT Inc AMP8DSQF65 | Demoboard AmP72XXEB

AmP72XX Evaluation Board

Details

TopologieAbwärtswandler
Eingangsspannung12 V
Ausgang 11.2 V / 10 A

Beschreibung

The AmP7220BEB and AmP7202BEB are ready to use Evaluation Boards to evaluate the Dual-Buck, DrMOS, LDO and LDSW Power Components when configured in the AmP8DB6 PMIC. Optionally, the Bucks may be modified as needed by the WebAmP tool and downloaded over the USB cable. The .HAX file downloads to the AmP8DB6 On-Demand PMIC while the .HEX file downloads to the flash memory. Functionality may be extended using On-Demand WebAmP tools. For additional information, please check the following link: https://www.andapt.com/docs .

Eigenschaften

  • Demonstrates PMIC functionality in an On-Demand AmP8DB6 IC
  • One DrMOS Buck Regulator
  • One 10A Synchronous Buck Regulator
  • One 6A Synchronous Buck Regulator
  • Two LDOs (AmP7220BEB) or two Load Switches (AmP7202BEB)
  • Four 0.2A auxiliary LDOs:1.2V,1.8V, 2.5V, 3.3V
  • Sequencing
  • WebAmP™ Tool Downloads Configuration Files:
  • HAX file to configure the device directly
  • HEX file (Intel HEX) to program on-board flash

Typische Anwendungen

  • Power components, WebAmP Design Tools, Configuration Bitstream File USB Download, AmP PMIC, Evaluation Board.

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
150060GS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 525 Grün 515 430 3.2 InGaN 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
150060RS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 625 Rot 630 250 2 AlInGaP 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
744325072SPEC
8 Dateien WE-HCI SMT-Hochstrominduktivität SMT 1050 -40 °C up to +150 °C 10.5 10.2 0.72 37.8 14 35 1.3 115 Superflux -40 °C bis zu +150 °C 2 4.7
865080553014SPEC
7 Dateien WCAP-ASLI Aluminium-Elektrolytkondensatoren V-Chip SMT220 µF ±20% 35 8.0 x 10.5 -55 °C up to +105 °C 140.454545 MΩ 10.5 8.3 2000 -55 °C bis zu +105 °C 570 210 77 8 15" Tape & Reel
885012206095SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012106019SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)220 nF ±20% 25 0603 -55 °C up to +85 °C 3.52.3 GΩ X5R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207098SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0805 -55 °C up to +125 °C 2.55 GΩ X7R Klasse II 2 1.25 0.5 0.8 7" Tape & Reel
885012107006SPEC
8 Dateien WCAP-CSGP MLCCs 6.3 V(DC)47 µF ±20% 6.3 0805 -55 °C up to +85 °C 100.002 GΩ X5R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
694108106102SPEC
6 Dateien WR-DC DC Power Jack Right Angled SMT Ø 6.4 with 4 soldering pads & pegs SMT 5 24 -40 °C up to +85 °C100 MΩ -40 °C bis zu +85 °C Right Angled 5 Tape and Reel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Gerade 3 Beutel
61300421121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster