IC-Hersteller Analog Devices

IC-Hersteller (96)

Analog Devices LTC2949 | Demoboard DC2732

Current, Voltage & Charge Monitor for High Voltage Battery Packs

Details

TopologieSonstige Topologie
IC-RevisionA

Beschreibung

The LTC2949 is a high precision current, voltage, temperature, charge and energy meter for electrical and hybrid vehicles and other isolated current sense applications. It infers charge and energy flowing in and out of the battery pack by monitoring simultaneously the voltage drop over up to two sense resistors and the battery pack voltage.Low offset ΔΣ ADCs ensure accurate measurement of voltage and current with insignificant power loss. Continuous integration of current and power ensures lossless tracking of charge and energy delivered or received by the battery pack.The built-in serial interface can be configured to support isolated isoSPI communication to the host or as SPI interface.The LTC2949 features 12 internally buffered high impedance inputs (V1 to V12) for measuring voltages from external sensors or resistor dividers allowing to measure temperatures, HV-Link voltages, chassis isolation and supervise contactor states. LTC2949 has up to five programmable digital outputs which can be set to ground, supply or toggling at 400kHz.

Eigenschaften

  • Measures Battery Stack Voltage, Current and Power
  • Indicates Accumulated Battery Charge and Energy
  • 20-Bit Current Measurement with <1μV Offset
  • Built-In Isolated isoSPI™ or SPI Interface
  • LTC68xx/ADBMS68xx Compatible, Supports Synchronous Measurements with Cell Monitors
  • Up to 12 Buffered Voltage Measurement Inputs
  • Up to 5 GPOs, Configurable to Drive Ground, Supply or Toggling at 400kHz
  • High or Low Side Current Sense
  • 0.3% Current and Voltage Accuracy
  • 1% Energy and Charge Accuracy
  • True Average ADCs
  • I2C EEPROM Interface to Store Board Calibration Factors
  • Threshold Registers for all Measured Quantities
  • Engineered for ISO26262 Compliant Systems
  • Open Wire Detection on Input Pins
  • Available in 48-Lead LQFP Package
  • AEC-Q100 Qualified for Automotive Applications

Typische Anwendungen

  • Backup Battery Systems / High Power Portable Equipment
  • Electric and Hybrid Vehicles
  • Isolated Current Sensing

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieWicklungstypL
(µH)
Z @ 100 MHz
(Ω)
IR
(mA)
RDC max.
(Ω)
VR
(V)
VT
(V (DC))
Muster
744232102SPEC
7 Dateien WE-CNSW Stromkompensierter SMT Line Filter bifiliar 1.263 1000 230 1 50 125
750340848SPEC
Analog Modem Transformer
Artikel Nr. Daten­blatt Simu­lation
744232102SPEC
750340848SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieWicklungstypL
(µH)
Z @ 100 MHz
(Ω)
IR
(mA)
RDC max.
(Ω)
VR
(V)
VT
(V (DC))
Muster