IC-Hersteller Analog Devices

IC-Hersteller (95)

Analog Devices ADM3057E | Demoboard EVAL-ADM3055EEBZ

5 kV rms/3 kV rms, Signal and Power Isolated, CAN Transceivers for CAN FD

Details

TopologieSonstige Topologie
Eingangsspannung5 V

Beschreibung

The EVAL-ADM3055EEBZ allows the user to evaluate the ADM3055E and the ADM3057E isolated signal and power transceivers for controller area network (CAN) or CAN with flexible data rate (CAN FD) networks. The EVAL-ADM3055EEBZ allows all of the input and output functions to work without the need for external components.Based on the Analog Devices, Inc., iCoupler® technology, the ADM3055E and the ADM3057E integrate logic side on-off keying (OOK) signal isolation channels and an Analog Devices isoPower® dc-to-dc converter to provide regulated, isolated power that is well below EN55022 Class B limits when transmitting on a 2-layer printed circuit board (PCB) with ferrites.The EVAL-ADM3055EEBZ comes populated with an ADM3055E. Full specifications of the ADM3055E and the ADM3057E can be found in the ADM3055E and the ADM3057E data sheets, available from Analog Devices and must be consulted in conjunction with this user guide when using the EVAL-ADM3055EEBZ.The EVAL-ADM3055EEBZ is compatible and can be used to evaluate the ADM3057E. The ADM3055E and the ADM3057E differ by package and isolation capabilities, but both devices are functionally equivalent for evaluation.

Eigenschaften

  • ADM3055E with isoPower integrated, isolated, dc-to-dcconverter
  • 2-layer PCB with low radiated emissions, passes EN55022Class B
  • On-board LDO for 6 V to 9 V supply, providing 5 V to theADM3055E VCC pin
  • Screw terminal connectors include
    • 6 V to 9 V LDO, 5 V power supply to the VCC pin and the VIO pin
    • 5 V direct power supply to VCC pin
    • 1.7 V to 5.5 V direct power supply to the VIO pin
    • TXD pin, RXD pin, STBY pin, SILENT pin, AUXIN pin,AUXOUT pin, and RS pin signals
  • Divided PCB return planes for GND1 and GND2
  • SMA connectors for TXD pin and RXD pin signals

Typische Anwendungen

  • CANOpen, DeviceNet, and other CAN bus implementations
  • Transport and infrastructure
  • Industrial automation / Process control and building control

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
691213710002SPEC
6 Dateien WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular Rising Cage Clamp PCB Ja 26 to 16 (AWG) 0.5 to 1.5 (mm²) -40 °C up to +105 °C 10 2 Horizontal 10 Karton
691213710003SPEC
6 Dateien WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular Rising Cage Clamp PCB Ja 26 to 16 (AWG) 0.5 to 1.5 (mm²) -40 °C up to +105 °C 15 3 Horizontal 10 Karton
885012206014SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)10 nF ±10% 10 0603 -55 °C up to +125 °C 510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206046SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)100 nF ±10% 16 0603 -55 °C up to +125 °C 3.55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)10 µF ±10% 10 0805 -55 °C up to +125 °C 100.01 GΩ X7R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
885012207090SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)4.7 nF ±10% 50 0805 -55 °C up to +125 °C 2.510 GΩ X7R Klasse II 2 1.25 0.5 0.8 7" Tape & Reel
61300421121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster