Würth Elektronik - Passive Components - Power Magnetics - Shielded Power Inductors - WE-HCFT Disclaimer: While Würth Elektronik eiSos has made every reasonable effort to ensure the accuracy of the PCB layout models provided, Würth Elektronik eiSos does not guarantee the exemption of error on the PCB layout models, nor does Würth Elektronik eiSos guarantee that the PCB layout model is current. Würth Elektronik eiSos reserves the right to make any adjustments at any time without notice. Würth Elektronik eiSos expressly disclaims all implied warranties regarding this PCB layout model. Please contact us for more information: libraries@we-online.com Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions www.we-online.com Fusion360, Library Revision 2026a, 2026-10-12 Copyright: Würth Elektronik WE-HCFT THT High Current Inductor Size: 3521, THT LXWXH=21.5X36X35mm Dot for Start of Winding >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding Milling Layer the hole size should follow the Milling Layer PCB Cutout Area Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding Milling Layer the hole size should follow the Milling Layer PCB Cutout Area Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding Milling Layer the hole size should follow the Milling Layer PCB Cutout Area Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE WE-HCFT THT High Current Inductor Size: 2012, THT LXWXH=17X22X13.5mm Dot for Start of Winding >NAME >VALUE WE-HCFT THT High Current Inductor Size: 2012, THT LXWXH=17X22X13.5mm Dot for Start of Winding >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3533, THT LXWXH=34.5X36X35mm Dot for Start of Winding >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3533, THT LXWXH=34.5X36X35mm Dot for Start of Winding >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm >NAME >VALUE WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm >NAME >VALUE WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm >NAME >VALUE WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm >NAME >VALUE WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm >NAME >VALUE WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer >NAME >VALUE WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer >NAME >VALUE WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer Milling Layer the hole size should follow the Milling Layer >NAME >VALUE WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding PCB Cutout Area PCB Cutout Area >NAME >VALUE Milling Layer the hole size should follow the Milling Layer PCB Cutout Area PCB Cutout Area Milling Layer the hole size should follow the Milling Layer WE-HCFT THT High Current Inductor Size: 3521, THT LXWXH=21.5X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2520, THT LXWXH=25X20.8X21.75mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3540, THT LXWXH=41X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2012, THT LXWXH=17X22X13.5mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2012, THT LXWXH=17X22X13.5mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3533, THT LXWXH=34.5X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3533, THT LXWXH=34.5X36X35mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32X32X30mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3231, THT LXWXH=32.2X31.5X30.5mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm WE-HCFT THT High Current Inductor Size: 4141, THT LXWXH=41.5X40.5X37.5mm WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 2504, THT LXWXH=22X25.7X4.1mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding WE-HCFT THT High Current Inductor Size: 3635, THT LXWXH=36X35.7X34.2mm Dot for Start of Winding >NAME >VALUE >NAME >VALUE WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2025-04-30 2025 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Created by Ella Wu 2026-10-12 2026 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2024-11-19 2024 (C) Würth Elektronik WE-HCFT THT High Current Inductor Shielded Characteristics Version to assure the mechanical stability Magnetically shielded Extremely low RDC Ferrite (MnZn): Inductance ranging from 1.5 µH up to 65 µH Current capability up to 75 A (Saturation >125 A) Low core losses Operating temperature -40 °C to +125 °C Metal Alloy: Inductance ranging from 0.6 µH up to 110 µH Current capability up to 100 A (Saturation >260 A) Inductance stability across all operating temperatures Operating temperature -55 °C to +155 °C Applications High current power supplies Battery chargers Solar inverter Power factor correction circuits Uninterruptible power supplies Details see: www.we-online.com/en/components/products/WE-HCFT Updated by Ella Wu 2025-04-30 2025 (C) Würth Elektronik Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.