Applications
- High current Wire-to-Board & Board-to-Board connections
- Angled electrical connection of cable or PCBs
- Angled mechanical assembling of PCBs on housings
- Suitable for rough environmental conditions
| General Information | |
|---|---|
| Operating Temperature | -55 °C up to +150 °C |
| Material | Brass |
| Surface | Tin |
| Execution | Press-Fit |
| Packaging Properties | |
|---|---|
| Packaging | Bulk |
Application Notes
Products
| Order Code | Datasheet | Downloads | W (mm) | H (mm) | IR (A) | Ti | Ø ID (mm) | Tl (mm) | Pins | IR (A) | Design Kit | Samples |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7461066 | SPEC | 4 files | 7 | 14 | 130 | M3 | – | 4 | 9 | 130 | – | |
| 7461110 | SPEC | 4 files | 7 | 14 | 130 | – | 3.2 | – | 9 | 130 | – | |
| 7461111 | SPEC | 4 files | 9 | 14 | 180 | M4 | – | 5 | 16 | 180 | – | |
| 7461067 | SPEC | 4 files | 9 | 14 | 180 | – | 4.2 | – | 16 | 180 | – | |
| 7461112 | SPEC | 4 files | 9 | 14 | 180 | M5 | – | 5 | 16 | 180 | – | |
| 7461113 | SPEC | 4 files | 9 | 14 | 180 | – | 5.2 | – | 16 | 180 | – | |
| 7461114 | SPEC | 4 files | 13 | 20 | 250 | M6 | – | 8 | 25 | 250 | 746701 | |
| 7461068 | SPEC | 4 files | 13 | 20 | 250 | M8 | – | 8 | 25 | 250 | – | |
| 7461115 | SPEC | 4 files | 13 | 20 | 250 | – | 6.2 | – | 25 | 250 | – | |
| 7461117 | SPEC | 4 files | 16 | 25 | 350 | M10 | – | 10 | 36 | 350 | – |
| Order Code | Datasheet |
|---|---|
| 7461066 | SPEC |
| 7461110 | SPEC |
| 7461111 | SPEC |
| 7461067 | SPEC |
| 7461112 | SPEC |
| 7461113 | SPEC |
| 7461114 | SPEC |
| 7461068 | SPEC |
| 7461115 | SPEC |
| 7461117 | SPEC |
| Samples |
|---|
| Order Code | Datasheet | Downloads | W (mm) | H (mm) | IR (A) | Ti | Ø ID (mm) | Tl (mm) | Pins | IR (A) | Design Kit | Samples |
|---|
REDCUBE PRESS-FIT
Applications, Performance & Press-Fit Process
Applications
The current rating of REDCUBE PRESS-FIT is impressive. With the same ampacity, REDCUBE PRESS-FIT has the lowest heat development compared to other parts that supply power for PCBs.
- High current Wire-to-Board & Board-to-Board
- Mounting of copper bars
- Angled assembling of cable, PCB and housing
- Mounting of IGBT modules
Remarkable Performance
With the lowest Failure-In-Time value, REDCUBE PRESS-FIT is the most reliable technology on PCB. The FIT value is up to 30 times better than that of a SMD solder joint. REDCUBE PRESS-FIT is suitable for two-side mounting and allows very compact design of modules.
- Simple & quick processing
- No cold solder joints
- High process safety
- Low self heating
- Two-sided mounting of PCBs
PRESS-FIT Process
Pressing the pins into the PCB, a high friction between pin and plated through-hole generates a homogeneous cold-welding between materials. No other technology transfers power up to 500 A at this low heat development.
- Homogeneous material transition between pin and through-hole plating
- Contact resistance less than 200 μΩ
- Gastight electrical and mechanical connection
- Extremely strong mechanical connection
Mates with
Assortments
Articles from this product series can be found in the following assortments:
Videos
#askLorandt explains: REDCUBE PRESS-FIT Process
Videos
Würth Elektronik Webinar: REDCUBE - Everything about high currents on the printed circuit board
Videos
Würth Elektronik Webinar: REDCUBE HighPower Terminals for ampacity of 50-500 A